The introduction of stamping elbow and its advantages

The stamping elbow is a kind of elbow pipe fittings. It has shown good performance in practical use at home and abroad. The basic forming process of stamping elbow is: the sheet metal with the same material as the pipe is pressed into a half annular elbow with a stamping die, and then the two half annular elbows are welded to form.

Due to the different welding standards of all kinds of pipelines, semi-finished products are usually fixed by the group of spot welding factory, and then welded according to the grade of pipeline weld during field construction. Therefore, the stamping elbow is also known as the two-half welding elbow.

The stamping elbow

The advantages of stamping elbow are mainly shown in the following aspects:

(1) The blank of the stamping elbow is flat or developable surface, so the blanking is simple, the accuracy is easy to ensure, and the assembly and welding are convenient.

(2) The stamping elbow does not need the pipe blank as raw material, which can save the cost of pipe making equipment and die, and at the same time, it can obtain the elbow of arbitrary size and relatively thin wall thickness.

(3) Bue of the above two reasons, stamping elbow can greatly shorten the manufacturing cycle, while greatly reducing production costs. Because it does not need any special equipment, it is very suitable for on-site processing and assembly of large stamping elbow.

The stamping elbows

As the professional manufacturer of flanges, fittings, pipes and other pipeline products, our HEIBEI HAIHAO GROUP can produce and supply various kinds of stamping elbows with high quality. Our customers are widely distributed all over the world. If you have any need, welcome to contact us.Email:sales@haihaogroup.com