Do you know the details of Slip-On Flange?

Slip on pipe flanges are typically provided with a raised or flat face. When a raised face is necessary for slip on pipe flanges, the standard height is 1/16 inch for slip on pipe flanges fewer than 400#. For slip on pipe flanges of 400# and up, the standard slip on pipe flange raised face height is 1/4 inch.

The slip-on flange is positioned so the inserted end of the pipe or fitting is set short of the flange face by the thickness of the pipe wall plus 1/8 of an inch, which thus allows for a fillet weld inside the SO flange equal without doing any damage to the flange face. The back or outside of the slip-on flange or SO flange is also welded with a fillet weld.

ANSI B16.5 A105 RF forged slip on flanges

Standard:

ANSI B16.5, ANSI B16.47 SERIES A & B, DIN86029, DIN86030, EN1092

Material:

Carbon Steel:ASTM A 105/A105N

Stainless Steel:ASTM A182 F304/304L, F316/316L, F321

Alloy Steel:ASTM A182 F1, F5, F9, F11, F12, F22, F91

Size & Rating:

1/2″-48″ ANSI CL150-CL2500, DIN 6BAR-40BAR, JIS 5K-30K

Face Type:

Flat Face, Raised Face, Ring Joint Face, Lap Joint Face, Male Face, Female Face, Tongue & Groove Face

If you have any inquiry of slip on flange, please do not hesitate to contact us.Email:sales@haihaogroup.com

Stainless steel SS316 weld neck flanges and slip on flanges