Haihao Group Supplies EN10253-2 P265GH Elbows for a Poland Industrial Project
Haihao Group recently completed the production and shipment of a batch of EN10253-2 P265GH elbow fittings for a customer in Poland. The order included various long-radius and short-radius elbows manufactured from seamless steel pipes, meeting stringent European project requirements for dimensional accuracy, welding preparation, and surface quality.
As a trusted manufacturer of industrial pipe fittings, Haihao Group continues to provide customized solutions for power generation, district heating, pressure vessel systems, and industrial pipeline projects across Europe.
Order Overview
The shipment consisted of multiple types of elbows manufactured according to EN 10253-2 Type A requirements.
90° 2D Elbows
- 0 × 10.0 mm BA2 90° – P265GH
- 0 × 12.5 mm BA2 90° – P265GH
- 3 × 7.1 mm BA2 90° – P265GH
- 3 × 8.8 mm BA2 90° – P265GH
- 1 × 8.0 mm BA2 90° – P265GH
90° 3D Elbows
- 9 × 8.8 mm BA3 90° – P265GH
- 1 × 8.0 mm BA3 90° – P265GH
90° 5D Elbow
- 4 × 8.8 mm BA5 90° (R=970 mm) – P265GH
All products were manufactured from large-diameter seamless steel pipes to ensure excellent structural integrity and reliable performance under pressure.
Why EN10253-2 P265GH Elbows Are Widely Used
The EN10253-2 P265GH elbow is commonly selected for piping systems operating at elevated temperatures and moderate pressures. P265GH is a non-alloy pressure vessel steel with excellent weldability and mechanical properties, making it suitable for:
- Thermal power plants
- Boiler systems
- District heating networks
- Petrochemical facilities
- Industrial process pipelines
Compared with standard carbon steel fittings, P265GH seamless elbows offer reliable performance in demanding pressure equipment applications where material consistency and compliance with European standards are critical.
EN10253-2 P265GH elbows manufactured by Haihao Group
Strict Manufacturing Requirements
For this Poland project, the customer specified detailed technical requirements beyond the standard dimensions.
Seamless Pipe Manufacturing
All elbows were produced using large seamless steel pipes rather than welded pipe sections. This manufacturing approach provides:
- Better pressure resistance
- Improved structural uniformity
- Reduced risk of weld-related defects
- Enhanced service life
Precise Welding Bevel Preparation
The elbows were machined with:
- Bevel angle: 30° (+5° tolerance)
- Root face: 1.6 mm ± 0.8 mm
Accurate bevel preparation helps ensure high-quality field welding and minimizes installation difficulties.
Tight Dimensional Control
To satisfy project specifications, Haihao Group maintained:
- Inside diameter tolerance: ±1%
- Outside diameter tolerance: ±1%
- Maximum allowable deviation: ±5 mm
These strict tolerances help ensure proper fit-up during pipeline assembly and reduce installation time on site.
Surface Inspection and Quality Assurance
Every EN10253-2 P265GH elbow underwent comprehensive quality inspections before shipment.
Sandblasting Treatment
The fittings received surface sandblasting to:
- Remove scale and impurities
- Improve coating adhesion
- Create a clean inspection surface
Magnetic Particle Testing
Magnetic particle inspection (MPI) was conducted to detect potential surface and near-surface discontinuities. This non-destructive testing method provides additional assurance of product integrity before delivery.
Quality documents and inspection reports were prepared according to customer requirements to ensure full traceability.
Supporting European Industrial Projects
European customers increasingly demand pipe fittings that combine strict compliance, consistent quality, and reliable delivery schedules. This shipment demonstrates Haihao Group’s ability to manufacture customized EN10253-2 P265GH elbows in multiple bending radii while meeting demanding technical specifications.
From large-diameter seamless elbows to special material fittings and custom fabrication requirements, Haihao Group supports industrial projects with complete manufacturing and inspection capabilities.
Looking for EN10253-2 P265GH Elbows?
Whether you require 2D elbows, 3D elbows, 5D elbows, seamless pipe bends, or custom-made pressure piping components, Haihao Group can provide solutions tailored to your project specifications.
Our engineering team can assist with:
- EN 10253 pipe fittings
- P265GH pressure piping components
- Seamless steel elbows
- Special radius bends
- Project-based manufacturing
- Third-party inspection support
Contact Haihao Group today for technical consultation, quotations, and customized piping solutions for your next industrial project.